beautypg.com

Miscellaneous questions – HONDA 2012 CR-V Navigation User Manual

Page 182

background image

180



Troubleshooting

Miscellaneous Questions

Trou

blesh

ootin

g

Miscellaneous Questions

Problem

Solution

My clock frequently changes forward and backward by
one hour.

The clock setting is automatically updated based on your GPS location. If you live and
work on the boundary between two time zones, you can turn off this feature.
2 Clock Adjustment P. 47

The clock changes even when I am not driving near a
time zone boundary.

The time zone boundaries are only approximated in the navigation system. Depending
on the geography of the time zone boundary, the switch to a different zone can be
erratic.
2 Clock Adjustment P. 47

My state does not observe daylight saving time. How
do I turn off this feature?

Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to Off.
2 Clock Adjustment P. 47

Daylight saving time has started, but the navigation
system did not change time even though Auto
Daylight is set to ON.

The automatic daylight saving time feature does not work in regions where the
daylight saving time system has not been adopted.

The navigation system automatic daylight feature is
not switching the navigation system clock on the
correct dates.

Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to On. Note that the automatic daylight feature
does not work in regions where the daylight saving time system has not been
adopted.
2 Clock Adjustment P. 47

The navigation system clock switched by one hour for
no apparent reason.

You may be driving near a time zone boundary.
2 Clock Adjustment P. 47

My battery was disconnected or went dead, and the
navigation system is asking for a code.

Press and hold the VOL

9 (Volume/Power) button for two seconds. The system

should reactivate. If you have installed an aftermarket system, see your dealer.
2 Entering the Security Code P. 186

How do I change the interface language?

Press the INFO button. Select Setup > Other > Language, and set the language to
English, Français, or Español.

CR-V_KA-31T0A800.book 180 ページ 2011年7月4日 月曜日 午後1時56分

This manual is related to the following products: