FIAT 600 - Manual (Page 52)

51
GETTING TO KNOW YOUR CAR
BONNET
To open the bonnet:
1) Pull the lever shown in fig. 74 in
the direction of the arrow.
2) Press tab B as shown in fig. 75.
3) Lift the bonnet and release the
support rod B-fig. 76 from its clip A.
4) Place the tip of the support rod
in recess C of the bonnet.
Important. The bonnet
might fall violently if the
support rod is not posi-
tioned properly.
This should only be
done when the car is sta-
tionary.
Before opening the bon-
net, check the wind-
screen wiper arms are
not lifted from the windscreen.
When the engine is hot,
mind your hands when
working inside the engine
compartment to avoid burning
yourself. Never put your hands
near the fan: it could start up
even without the key in the
switch. Wait until the engine
cools down.
fig. 74
P4Q00025
fig. 75
P4Q01093
001-069 Seicento GB 22-11-2007 10:49 Pagina 51