Bodywork – FIAT 600 User Manual
Page 121
120
CAR MAINTENANCE
The windscreen washer jets can be
directed by adjusting the inclination of
the nozzles. Direct the spray so that
it reaches the highest point reached
by the blades.
BODYWORK
PROTECTING THE CAR
FROM ATMOSPHERIC
AGENTS
The main causes of rust are:
– atmospheric pollution;
– salt and humidity in the atmos-
phere (coastal or very hot and humid
areas);
– environmental conditions that are
specific to the season.
In addition, the abrasiveness of dust
in the atmosphere and sand carried by
the wind as well as mud and stones
kicked up by other cars must not be
underestimated.
For your Fiat 600, Fiat has used lead-
ing-edge technological solutions to ef-
fectively protect the body from rust.
These are the most important:
– painting systems and products that
make the car particularly resistant to
rust and scratching;
2) Position the new arm correctly
and fasten the nut B.
3) Replace the cover A.
NOZZLES fig. 12-13
If there is no jet of liquid, first make
sure that there is liquid in the reser-
voir: see
CHECKING FLUID LEVELS
in this
chapter.
Then make sure that the holes in the
nozzles
are not clogged up. Use a pin for this
if necessary.
fig. 13
P4Q00127
fig. 12
P4Q00126
105-123 Seicento GB 22-11-2007 10:51 Pagina 120