FIAT Punto Classic User Manual
Page 208
![background image](/manuals/240381/208/background.png)
207
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
REFITTING THE STANDARD WHEEL
Proceed as follows:
❒
Following the procedure described previously, raise the car and
remove the spare wheel;
❒
Make sure the contact surfaces between wheel and hub are clean so
that the fastening bolts will not come loose;
❒
Fit the standard wheel by inserting the first stud (B) for two threads in
the hole closest to the inflation valve (A);
❒
for cars fitted with press-fit wheel cap, press the cap edge with your
palms (without hitting it) against the wheel;
❒
Fit the wheel cap, making the symbol
C (on the back of the cap)
coincide with the inflation valve and fit the other three bolts;
❒
Fasten bolts using the wrench provided;
❒
Lower the car and remove the jack;
❒
fasten the bolts in the order shown above.
IMPORTANT Incorrect fitting may cause the wheel cap to come off
when the car is travelling.
F0I0116m
F0I0117m