FIAT Punto Classic - Manual (Page 105)

SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD
AND
CONTROLS
To fold the whole seat, lift the cushion and then tip the seat backs as
described for the rear single seat.
The central three-point seat belt and reel mechanism (where fitted) can
be removed as follows:
❒ press the black button on the buckle (A) if the seat belt is fastened;
❒ take the central belt slowly to the loop retainer (B) on the upper part
of the seat back and remove the second tongue (C) from the loop
retainer;
❒ remove the first tongue (D) from the loop retainer and fasten it to the
specific pin (E) on the rear pillar panel;
To restore conditions for use:
❒ release the first tongue (D) from pin (E);
❒ insert the first tongue (D) in loop retainer (B) without twisting the
belt. Make notch (F) on the belt tongue coincide with the respective
groove on the loop retainer and insert the second tongue (C) in the
loop retainer;
❒ pull the belt gently through loop retainer (B), and fasten the first
tongue (D) in buckle (A) (grey with black button). Make the two
yellow dots (one on the tongue and one on the buckle) coincide.
104
F0I0192m