FIAT Nuovo Doblo' Panorama - Manual (Page 24)

23
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Set date (Setting the date)
Using this function it is possible to change the date (day
– month – year).
To update, proceed as follows:
– press SET ESC: the year flashes on the display;
– press
▲ or ▼ to adjust the value;
– press SET ESC: the month flashes in the display;
– press
▲ or ▼ to adjust the value;
– press SET ESC: the day flashes in the display;
– press
▲ or ▼ to adjust the value.
N.B. The setting will increase or decrease by one unit each
time
▲ or ▼ is pressed. Hold the button down to in-
crease/decrease the setting rapidly. Complete the setting
with single presses of the button when you approach the
required setting.
– press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen
without saving.
– when you select “Time”, pressing SET ESC makes the
hours flash on the display;
– press
▲ or ▼ to adjust the value;
– press SET ESC: the minutes flash in the display;
– press
▲ or ▼ to adjust the value.
N.B. The setting will increase or decrease by one unit each
time
▲ or ▼ is pressed. Hold the button down to in-
crease/decrease the setting rapidly. Complete the setting
with single presses of the button when you approach the
required setting.
– when you select “Mode”, pressing SET ESC makes the
mode flash on the display;
– press
▲ or ▼ to select 24h or 12h.
When you have made the required adjustments, press SET
ESC to go back to the submenu screen or hold the but-
ton down to go back to the main menu screen without
saving.
– hold down SET ESC again to go back to the standard
screen or main menu, depending on which point in the
menu you have reached.