9 security, 1 basic security, Security – TP-Link TL-WR940N User Manual
Page 62: Basic security
300Mbps Wireless N Router
TL-WR940N/TL-WR941ND
-54-
¾
Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or
Disable button. As allowing this may present a risk to security, this feature is enabled by
default.
¾
Current UPnP Settings List - This table displays the current UPnP information.
•
App Description -The description provided by the application in the UPnP request
•
External Port - External port, which the router opened for the application.
•
Protocol - Shows which type of protocol is opened.
•
Internal Port - Internal port, which the router opened for local host.
•
IP Address - The UPnP device that is currently accessing the router.
•
Status - The port’s status displayed here. “Enabled” means that port is still active.
Otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.
4.9 Security
Figure 4-37 The Security menu
There are four submenus under the Security menu as shown in Figure 4-37: Basic Security,
Advanced Security, Local Management and Remote Management. Click any of them, and you
will be able to configure the corresponding function.
4.9.1
Basic Security
Choose menu “Security → Basic Security”, you can configure the basic security in the screen
as shown in Figure 4-37.