TP-Link TL-WR940N User Manual
Page 23
300Mbps Wireless N Router
TL-WR940N/TL-WR941ND
-15-
Figure 3-10 Quick Setup – PPTP
¾
User Name and Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
¾
Dynamic IP/Static IP - Select Static IP if IP address, subnet mask, gateway and DNS
server address have been provided by your ISP. Otherwise, please select Dynamic IP.
¾
Server IP Address/Name - Enter server IP address or domain name provided by your
ISP.
¾
IP address - Enter the IP address used for dial-up. (Only can be configured when Static
IP is selected)
¾
Subnet Mask - Enter the subnet mask provided by your ISP. (Only can be configured
when Static IP is selected)
¾
Gateway - Enter gateway provided by your ISP. (Only can be configured when Static IP
is selected)
¾
DNS - Enter DNS server provided by your ISP. (Only can be configured when Static IP is
selected)
5. Click
Next to continue, the Wireless settings page will appear as shown in Figure 3-11.