TIMBERK TAW H2 D User Manual

Page 4

5. Scope of supply
1. Air washer 1 pc.
2. Operation manual 1 pc.
3. Guarantee card 1 pc.
4. Packing 1 pc.
6. Filling tank with water

Prior to filling the tank remove the cover from the tank.

1. Grab the tank handle and pull it upwards.
2. Unscrew the tank cap counterclockwise.
3. Fill the tank with water.
4. Screw the tank cap clockwise.
Make sure the tank cap is securely tightened. Be sure that the rubber
gasket is installed to the tank cap.
5. Install watertank inside the device.

Important!
1. To prevent an electric shock, prior to dismantling the device
(removing the tank), unplug the device from electric mains! 2. Do
not fill the tank with liquids other than tap water.
Other composition of liquids has an adverse effect on internal
parts and results in a failure.
3. Do not fill the device or the water tank with such additives as
essential oil, flavoring substance, detergent, chemical medical
products, warm water (over 40°), etc.
Otherwise the water tank and internal parts of the unit will be
damaged and be broken.
4. Do not fill water directly into the internal part of the unit or the
atomizer.
Water inside the unit may result in failure of the device.
5. Do not hit and do not throw the water tank. It can be damaged
which will result in water leakage. Do not use the unit in case the
tank is heavily hit.
Contact a maintenance service or maintenance and repair station
immediately.
6. Every day fill the tank with pure water and keep the unit clean.

1 - The indicator of lack of water
2 - Lock Indicator panel
3 - Timer indicators (from left to right): device off after 2h, 4h, 6h, 8h
4 - Indicators of modes (from left to right): economic (Econom), intensive
(Turbo), automatic (Auto), comfortable (Comfort)
5 - Power on / off « »

Fig. 2

Panel control

humidifying discs

ompartment

cover for water tank

pallet for water

water tank

water tank cover

Water tray and water tank design

Periodically clean the pallet and humidifying discs

ATTENTION!
Order to get the pallet, you must first remove the water tank.

6 - Push button operation modes: Economy (Econom), intense (Turbo),
automatic (Auto), comfort (Comfort)
7 - Button timer for automatic shut-off device after 2h, 4h, 6h, 8h
8 - On / Off button lock control panel