TIMBERK TAW H2 D - Manual (Page 3)

3
ENGLISH
Take out the plug from an outlet in the following cases: prior to draining or filling
the tank with water; prior to cleaning and maintenance; prior to
mantling/dismantling of device elements; prior to transportation of thedevice to
another place.
Install the humidifier on to a smooth dry surface. The outgoing steam may damage
surfaces it contacts. Do not install the humidifier on the floor, as well as in the
vicinity of heating appliances, furniture and other objects.
The manufacturer and the seller do not bear any responsibility for damages,
inflicted due to improper position of the device.
To prevent damage of the device, do not add essential oils, preservatives, flavors
and other foreign substances to humidification water. The manufacturer and the
seller do not bear any responsibility for damages of the device, inflicted due to
failure to follow this requirement.
Do not pull the power cord and do not touch it by wet hands when you unplug the
device from electric mains.
3. Technical characteristics
4. Description of the unit
Rated current, A
Power consumption, W
Power supply, V/Hz
Water protection
Water tank, L
Capacity of humidity, ml/h
Table 1.
Electrical protection class
Device dimension, mm
Net weight, kg
1 - Air inlet grille.
2 - Pallet for of water.
3 - Air release panel.
4 - Control Panel.
5 - Cover the tank.
6 - Color LED humidity levels.
7 - Display Area, which reflects the current level of humidity (humidistat).
8 - Power cable with plug.
Fig. 1
Air washer TAW H2 D (BL) moisturizes and cleanses the air without the
use of replacement filters.
220/50
380
IPX0
1,73
4,0
300
365x200x395
II
6,22
50,0 2 Application area, m
1
2
3 4 5
6
7
8
The principle of operation of the device.
Dry contaminated air is drawn into the fan unit. Passing through the
humidifying roller, which rotates with the engine and continuously
wetted with water, the air is moistened, and particles of dust and dirt
remain in the pan.
The air that pass through a great number of disk barriers fastly becomes
saturated with moisture and pures from the dust and dirt, that
afterwards flows to the water pan.
The treated air exits clean and moist - both in the nature of air is washed
by rain water.
Water is constantly being updated, acting out of the tank.
Performance device for moistening and cleaning is regulated by various
modes of operation.
Built-in humidistat constantly measures the level of relative humidity,
current figures reflected in the display area. Low, medium and high
levels of humidity indicator displays a color: white, blue and green,
respectively.
Humidification based on the principle of automatic self-regulation (cold
and heat of evaporation). Therefore, cleaning the air Timberk creates
optimum humidity without additional devices.
www.timberk.com electric air washer (purifier)
The manufacturer reserves the right to change the set-list of the device (including liquid and powder
components) for different supplies without prior notice. The changes either in no way influence the
basic technical parameters of the device or may improve them, and also not violate the legislation or
quality standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions of the device, but not
more than by +\- 5-20% (depending on the product category)