Tanita BC-545N - Manual (Page 11)

9
Guest mode allows you to programme the unit for a one-time use without resetting a
Personal data number.
Press the ON/OFF key while the Hand-electrodes is mounted on the platform scale.
“0.0” will be shown.
Hold the Hand-electrodes and the USER button until “Guest” appears.
Press the SET button and input your personal information such as Age, Sex, Height. Please see page 4
for more details.
After “0.0” will be shown, step on the scale holding the Hand-electrodes.
Do not step off until the unit beeps twice.
The readings will be shown for 40 seconds.
PROGRAMMING THE GUEST MODE
TAKING WEIGHT MEASUREMENT ONLY
Press the ON/OFF key while the Hand-electrodes is mounted on the platform scale.
After 2 or 3 seconds, “0.0” will appear in the display and the unit will beep. When
“0.0” appears in the display, step onto the platform. The Body weight value will
appear. The power will then shut down automatically.
SWITCHING THE WEIGHT MODE
You can switch the unit indication by using the switch on the back of the scale (kg/lb/st lb).
kg
lb
st lb
Note: For use only with models containing the
weight mode switch.