Swarovski Optik CTS - Manual (Page 8)

15
DE
14
DE EN EN
• The protective cap for the
eyepiece is attached to the
eyepiece with a cord. By
loosening the screw on the
eyepiece with a screwdri-
ver, you can remove the
cord with the cap from the eyepiece. Please rein-
sert the screw.
• Align the marking on the
eyepiece with the marking
on the bayonet fitting.
• Insert the eyepiece and
turn it to the right (clock-
wise) until the locking
mechanism of the body clicks into the eyepiece.
Detachment of the eyepiece
to remove the eyepiece,
press the locking mecha-
nism of the body down-
ward and turn the eyepiece
to the left (anti-clockwise)
until it can be removed.
Extend for use
Hold the body and the ocu-
lar of the extendable tele-
scope firmly.
2
1
then pull outwards until
the two extensions reach
their stopping point.
Use of the zoom eyepiece (e.g. 20-60x)
to change magnification:
turning the adjustment
ring to the right (clockwise)
decreases magnification
(down to 20x).
turning it to the left
increases the magnification (up to 60x). You will
be able to read the magnification above the index
point.
Focusing of image
the focusing will be done
by turning the adjustment
ring for focusing.
Both the extension tube
and eyepiece are rotating
with the ring.
on the extension tube you
find a scale for the estima-
tion of distance. this scale
is designed for easy focu-
sing.
shortest
possible
focusing
distance
far-away-object
direction of
turning for
focusing at
close objects
60x
20x