SoundMax SM-MSD11 User Manual
Page 11

11
DIGITAL AUDIO: Digital output
SPDIF/OFF: no digital signal out (optical or coaxial output off), only analog audio
output.
SPDIF/RAW: no decoding on the amplifier digital signal input.
SPDIF/PCM: the amplifier must be supported by PCM decoding or Dolby digital
decoding function.
LPCM output: this item is available when Digital Output is set to SPDIF/PCM. Select
sample rating of the digital output as 48 kHz or 96 kHz.
HDCD
You can select the digital filter Off, 1x, 2x.The initial factory setup is Off.
Dolby setup
DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average signal.
DYNAMIC
If watching large dynamic scope movie program at night, by selecting this mode you
can reduce the volume to a very low level and at the same time keep the fine details
sounds. In this case, this doesn’t disturb the family and keep the quality sound.
Video setup
VIDEO OUTPUT
Off: set video output to CVBS.
RGB: set video output in Red/Green/Blue format when connecting to SCART
terminals.
COLOR SETTING
You can set sharpness, brightness, contrast, gamma, hue and saturation according to
your preference.