Gen eral operations – SoundMax SM-CDM1066 User Manual
Page 12
12
eral operations
r button
PWR button on the panel to switch the unit on. Press this button to switch the unit off.
Volume control
Rotate VOLUME regulator to adjust volume level.
Audio settings adjustment
Press SELECT button shortly and repeatedly to select an option: BAS (bass) => TRE (treble) => BAL
(balance) => FAD (fader) => BEEP => TAVOL => STEREO/MONO => EON ON/OFF => VOL (volume). Rotate
VOLUME regulator to adjust bass, treble, balance or fader.
Note: When equalizer is on, bass and treble adjustment is not available.
Caution: In each mode, the waiting time is several seconds, and when the waiting time is over, it returns to
the last display mode of radio or playback mode.
Mode selection
Press MODE button to choose a sound source: RADIO => Disc => USB => Memory card => AUX.
Reset function
RESET button (hole) is pressed with either a ballpoint pen or thin metal object. RESET function is to be
activated for the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
Clock adjustment
Press and hold DSP button to go to clock adjustment mode. Hour digits will blink. Press PREVIOUS or NEXT
button to adjust hours. Press DSP button to go to minute adjustment; minute digits will blink. Press
PREVIOUS or NEXT button to adjust minutes. Press DSP button to confirm clock setting.