SoundMax SM-CCR3036 User Manual
Page 13
13
et EQ modes
button repeatedly until EQ OFF is displayed. Rotate VOL knob to seleASS/ROCK/POP and OFF equalizer modes.
Beep function
Press SEL button repeatedly until BEEP ON (OFF) is displayed. Rotate VOL knob to select between ON (beep
sound is heard when a button is pressed) and OFF (no sound is heard when a button is pressed).
Clock
Press and hold PTY/CLK button to display the time on the screen. Then press and hold this button again; the
time indication will blink. Press NEXT button to adjust hours; press PREVIOUS button to adjust minutes. To
confirm the adjustment, press PTY/CLK button or leave the unit idle for several seconds.
Preset volume
Press and hold SEL button, then press it until P-VOL is displayed. Rotate VOLUME regulator to adjust the
preset volume level. This volume level will be active each time you switch on the unit.
Aux In
AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made
correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player
to listen to tracks using the car acoustic system.