SoundMax SM-CMMD7001 User Manual
Page 22
22
l/automatic tuning
al tuning: press PREVIOUS/NEXT buttons on the panel or SEEK-/PREVIOUS and SEEK
he RC and hold for 2 seconds to enter the manual tuning mode. Press these b
peatedly to select a frequency downward or upward step by step.
Automatic tuning: press PREVIOUS/NEXT buttons on the panel or SEEK-/PREVIOUS and SEEK+/NEXT
buttons on the RC, the automatic search will start. It will play when finds the station.
Programming tuner stations
There are 6 numbered preset buttons on the RC, with which you can store and recall up to 6 stations for each
band (18 FM, 12 MW). Select a station, then press and hold a preset button. The station will be saved in the
memory under the corresponding number. To recall a stored station, press the corresponding number button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold P.SCN/RPT button on the RC to enter auto store mode. The
radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store,
press the button again.
Note: During auto station preset, the unit will search and store stations with the strong signal first, and then
weaker signal stations until the memories are full.
Preset scan: Select a band, press P.SCN/RPT button on the RC to scan all preset stations in the memories
of the current band. To stop preset scan, press the button again.
RDS background
RDS service availability varies with areas. Please understand if RDS service is not available in you area, the
following service is not available.
AF (Alternative frequencies) function
Press and hold AF/TA button on the RC to enable AF function. When the radio signal strength is poor,
enabling the AF function will allow the unit to automatically search another station with the same PI (Program
Identification) as the current station but with stronger signal strength.
Note: AF indicator on the display will flash until RDS information is received. If RDS service is not available in
your area, turn off the AF mode.