ResMed Mirage Activa - Manual (Page 33)

33
Swift FX
Nano/
Swift FX
Nano
for Her
Mirage FX/
Mirage FX
for Her
SoftGel Activa LT Micro Activa*
Gross Dimensions - Mask fully assembled - no headgear. Largest variant only shown.
Height 430 mm 138 mm 155 mm 154 mm 155 mm 425 mm
Width 114 mm 86 mm 91 mm 95 mm 91 mm 110 mm
Depth 75 mm 88 mm 118 mm 117 mm 98 mm 135 mm
* Includes inlet tube and swivel assembly
Mask setting options: Select A if available, otherwise select B.
A Pillows/
Swift
Standard Activa Activa Standard Activa
B Mirage Vista Standard Standard Vista Standard
Environmental conditions – all masks:
Operating temperature: +5 °C to +40 °C
Operating humidity: 15 % to 95 % non-condensing
Storage and transport temperature: -20 °C to +60 °C
Storage and transport humidity: up to 95 % noncondensing
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any length
of time. Store the mask in a dry place out of direct sunlight.
Disposal
The mask does not contain any hazardous substances and may be disposed of
with your normal household refuse.
Symbols
The following symbols may appear on the mask or packaging.
Caution, consult accompanying documents; LOT Batch Code; REF Catalogue
Number; European Authorised Representative; Temperature
limitation; Humidity limitation; Does not contain natural rubber latex;
Manufacturer.
Warnings
• The vent holes must be kept clear.
• The mask should not be used unless the device is turned on. Once the mask is
fitted, ensure the device is blowing air.
• Follow all precautions when using supplemental oxygen.
• Oxygen flow must be turned off when the CPAP or bilevel device is not
operating so that unused oxygen does not accumulate within the device
enclosure and create a risk of fire.
• At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen
concentration varies depending on the pressure settings, user breathing
pattern, mask, point of application and leak rate.
• If any visible deterioration of a mask component is apparent (cracking, tears,
etc), the mask component should be discarded and replaced.
• Do not use aromatic-based solutions or scented oils (eg, eucalyptus or essential
oils), bleach, alcohol or products that smell strongly (eg, citrus) to clean any of
the mask components. Residual vapours from these solutions can be inhaled
and may also damage the mask, causing cracks.
• Your physician or sleep therapist is responsible for ensuring that the mask
is compatible with the device. If used outside specification or if used with
incompatible devices, the seal and comfort of the mask may not be effective
and optimum therapy may not be achieved.
• Do not combine components from different mask systems.
• Discontinue using the mask and consult your physician or sleep therapist if you
have ANY adverse reaction.
• Refer to your CPAP or bilevel device manual for details on its settings and
operational information.
• This mask should be disinfected and/or sterilised when used between users.