Cleaning the device (clean) – Hama MW1002 User Manual
Page 37

GB
37
MW-1002
Cleaning the device (CLEAN)
NOTE
To achieve a precise reading, make sure that there
is no leftover alcohol in the measuring chamber
prior to each alcohol test.
►
Start the cleaning process according to the chapter
entitled “Changing the settings”.
Press the “+/ ” button [7] to start the cleaning process.
ON is shown in the display [1], followed by a countdown
from CL08 to CL00. OFF is displayed when the cleaning
process is finished.
Press the SET button [8]. The time is shown in the
display [1].
u
u
u
00087697bda_neu.indd 37
00087697bda_neu.indd 37
03.08.2009 9:58:12 Uhr
03.08.2009 9:58:12 Uhr