Safety information - uk socket, Mains connection – Hama KD3552 User Manual
Page 29
![background image](/manuals/236020/29/background.png)
2
Safety information - UK socket
If the equipment for the UK is supplied with a mains cable fitted with a moulded plug.
Mains connection
This adaptator is suitable for use on
A.C.
mains supply,
100-230 V - 50/60 Hz
only. It must not be
connected to
D.C.
mains.
Note: The mains lead of the appliance is fitted with a moulded plug. If the mains sockets are not
compatible or if for any reason the plug is removed please follow the directions below.
The moulded plug cannot be rewired and if removed must be disposed of safely. Remove the fuse to
make it safer.
Do NOT under any circumstances plug the severed plug into any mains socket as this
could result in an electric shock.
Important!
If the plug is removed, rewire new plug as follows: The wires in the
mains plug are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
BLUE
wire to the terminal coded N (Neutral) or coloured black.
BROWN
wire to the terminal coded L (Live) or coloured red.
Do NOT make any connection to the terminal in the plug
which is marked by the letter E or by the safety symbol
or
coloured green and yellow.
E
N
L
BLUE
BROWN
A fused plug must be fitted with a fuse approved by ASTA or BSI to BS
1362 and fuse covers must always be securely replaced.
If the fuse blows, check the mains cable for damage or call a
qualified technician. Do not try to bridge the fuse or increase
its rating!
KD 3552-3554 / RST -TQC / PARLECLAIR 01/2007