Milwaukee M12 D E - Manual (Page 16)

10
English
GB
WARNING! Read all safety warnings and all instructions,
including those given in the accompanying brochure. Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and instructions for
future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when perfor-
ming an operation where the cutting accessory may contact
hidden wiring or its own cord. Cutting accessory contacting a
„live“ wire may make exposed metal parts of the power tool „live“ and
could give the operator an electric shock.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
Do not use the attachment for drilling applications in wood, steel
or plastic.
Do not use machines on any material containing asbestos.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors offer to retrieve old batteries
to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System C12 chargers for charging System C12 battery packs.
Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
This appliance is not intended for use by persons (including children)
with limited physical, sensory or mental capabilities or insufficient
experience and/or knowledge unless they are supervised by a person
who is responsible for their safety or have been instructed by them in
the safe use of the appliance. Children should be supervised in order
to ensure that they do not play with the tool.
The appliance may be used by children over the age of 8 years and
by persons with reduced phy-sical, sensory or mental capacity or by
persons with a lack of experience or knowledge if they are supervised
or have been instructed on the safe use of the appliance and the have
under-stood the potential dangers of using the appli-ance.
Children must never play with the Appliance
Cleaning and user maintenance must never be carried out by children
without Supervision.
SPECIFIED CONDITIONS OF USE
The dust extraction is intended for the extraction of dust in drilling
applications with rotary hammer drills in stone and concrete.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under “Technical Data” fulfills all the relevant regulations and the
directives 2011/65/EU (RoHs), 2004/108/ EC, 2006/95/EC and the
following harmonized standards have been used:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 +
A13:2008 + A14:2010 + A15:2011
EN 60335-2-2:2010 + A11:2012
EN 62233:2008
Winnenden, 2013-06-24
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for some
time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and
away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TECHNICAL DATA
Drilling applications
M12 DE
Production code 4405 01 01...
... 000001-999999
Drilling capacity max. 16 mm
Drilling depth 120 mm
No-load speed 0-22000 min -1
Battery voltage 12 V
Weight according EPTA-Procedure 01/2003
(Li-lon 1,5 Ah / Li-lon 3,0 Ah)
1,6 kg/1,8 kg