Makita BDF452 - Manual (Page 4)

4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols END001-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with
household waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its
implementation in accordance with national law, electric
equipment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use ENE034-1
The tool is intended for drilling and screw driving in wood,
metal and plastic.
GENERAL SAFETY RULES
GEA002-3
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
1. Red part
2. Button
3. Battery
cartridge
4. Switch trigger
5. Lamp
6.
Reversing switch lever
7. Speed change lever
8. Adjusting ring
9. Graduation
10. Pointer
11. Sleeve
12. Bit holder
13. Bit
14. Groove
15. Screw
16. Hook
17. Limit mark
18. Rear cover 19. Screws
20. Recessed part
21. Spring
22. Arm
23. Carbon brush cap
24. Hole
25. Carbon brush cap
Model BDF442 BDF452
Capacities
Steel 13 mm 13 mm
Wood 38 mm 38 mm
Wood screw 6 mm x 75 mm 10 mm x 89 mm
Machine screw M6 M6
No load speed (min
-1
)
High (2) 0 - 1,400 0 - 1,500
Low (1) 0 - 400 0 - 400
Overall length 197 mm 197 mm
Net weight (with type of battery cartridge) 1.7 kg (BL1430) 1.8 kg (BL1830)
Rated voltage D.C. 14.4 V D.C. 18 V