Pioneer DJM-500 - Manual (Page 16)

16
USING THE EFFECT FUNCTION
Operating Pitch Shifter and Reverb
1/2 3/4 1/1 2/1 4/1
1 2 3 4 MIC
MASTER
PARAMETER
AVERAGE
AUTO BPM COUNTER
REAL
BEAT
%
1 2 3 4
Display where CH3 has been pitch-shifted by 90%.
Using the External Effector
(Example) Set the external effect for the CH3 song.
1 Set the effect selector to SEND/RETURN.
2 Set the effect channel selector to CH3.
• The parameter LED 3 lights up.
3 Set the parameter of the external effector, etc.
• To check the effect sound, press the effect of the
monitor selector. This will enable the effect sound to
be monitored using the headphone and booth moni-
tor outputs.
4 Turn on the effect switch.
• The effect switch blinks and the effect (external ef-
fect) is imposed on the master output. Each press
will turn on or off the effects.
To use the auto BPM counter while using the external ef-
fector, select one channel from CH1 to CH4 of the monitor
selector (auto BPM counter selector).
• The LED of the channel selected by the auto BPM coun-
ter lights up.
• The BPM of the song input to the channel will be dis-
played on the auto BPM counter window (upper win-
dow).
• Select the BPM display (real-time/average) with the
switch button.
Real-time display : Displays the measured BPM value
for every beat.
If it cannot be measured for more than 5 seconds,
“– – –” will be displayed.
Average display : Measures and displays the average
of the BPM values measured every beat. Continues
displaying the previous BPM value when the average
value could not be measured.
1/2 3/4 1/1 2/1 4/1
1 2 3 4 MIC
MASTER
PARAMETER
AVERAGE
AUTO BPM COUNTER
REAL
BEAT
1 2 3 4
Displays the channel
and BPM selected with
the monitor selector.
(Example) Pitch-shift the CH3 song by 90%.
1 Set the effect selector to PITCH SHIFTER.
2 Set the effect channel selector to CH3.
• The parameter LED 3 lights up.
* All the auto BPM counter displays go off.
3 Set the parameter value (pitch %) using the
parameter knob.
• To check the effect sound, press the effect of the moni-
tor selector. This will enable the effect sound to be
monitored using the headphone and booth monitor
outputs.
4 Turn on the effect switch.
• The effect switch blinks and the effect (pitch shift) is
imposed on the master output. Each press will turn
on or off the effects.
The reverb effects can be produced by operating in the same
way.