Fein MBS16 - Manual (Page 9)

MBS 16
9
EN
Instruction manual for magnetic drill stand.
Overview.
1 Drive motor holder
Attaching the drive motor.
2 Lever for setting the stroke range
Infinitely variable stroke range for a
quick, safe tool change.
3 Capstan handle
Upward and downward movement of
the drill motor.
4 Depth scale
1 stroke mark stands for a 1 mm
upward and downward motion of the
drill motor.
5 Press-button for switching on the drive
motor/plug socket
Connects the voltage to the plug
socket.
6 Built-in plug socket
Attaching the drive motor.
7 Magnetic switch
Switching the magnetic drill stand ON
and OFF.
8 Magnetic foot
Secure the power tool to
the magnetic base.
9 Groove for safety strap
For securing the tool using the safety
strap.
10 Chipping protector
Protects the user from chips.
11 Supplied accessories
Safety strap (a),
Socket screw wrench (b),
Reducing ring Ø 33 mm (c),
Reducing ring Ø 38 mm (d),
Chip hook (e),
Chipping protector (f).
For your safety.
Before using this power tool, read
and comply with:
these instruction manual and the instruc-
tions for using the drive machine,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
These instruction manual and the
enclosed safety instructions should be
kept for later use and enclosed with the
device, should it be passed on or sold.
Intended use.
This device is intended for:
application in a weather-protected envi-
ronment, for commercial use in industry
and trade,
in combination with a drive machine for
drilling materials with a magnetizable sur-
face using core drills and full drills, and
tapping,
for application using the accessories given
in these instruction manual, or those rec-
ommended by FEIN.
The tool can be applied horizontally, ver-
tically and overhead for drive motors with
a collar.
The built-in socket (6) of the drill jig
serves for the electricity supply for the
drive machine.
3 41 01 024 06 7.book Seite 9 Mittwoch, 5. Mai 2004 9:50 09