Fein KBM32Q - Manual (Page 16)

16
KBM 32 Q EN
Declaration of conformity.
FEIN declares itself solely responsible for this
product conforming with the documents and
standards given on the last page of this Instruc-
tion Manual.
Specifications.
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
Environmental protection, disposal.
Packaging, worn out power tools and accesso-
ries should be sorted for environment-friendly
recycling. Further information can be obtained
from your specialist dealer.
Type KBM 32 Q
Reference number 7 270 27
Power input 700 W
Output 450 W
Speed, full load 440 rpm
Power supply type 1 ~
Weight according to
EPTA-Procedure 01/2003
10.0 kg
Class of protection I
Drilling-Ø Steel max.
Core bit
32 mm
Spiral bit 13 mm
Tap M 12
Magnetic holding power 9 000 N
Max drilling depth with core bits 50 mm
Height of drill jig 373 mm
Stroke 135 mm
Total stroke range 260 mm
Magnetic foot plate dimensions 160 x 80 mm
Sound emission
Measured A-weighted sound
power level L
wA
(re 1 pW), in
decibels 95
Measuring uncertainty K
wA
, in
decibels 3
A-weighted emission pressure
power level measured at the
workplace L
pA
(re 20 µPa), in
decibels 84
Measuring uncertainty K
pA
, in
decibels 3
Vibration emission
Rated acceleration, in m/s
2
0.5
Measuring uncertainty K, in
m/s
2
1.5
REMARK: The sum of the measured emission
value and respective measuring inaccuracy rep-
resents the upper limit of the values that can
occur during measuring.
Wear ear protection!
For measurement values obtained according to
the respective product standard, see the last
page of this Instruction Manual.
3 41 01 011 06 3.book Seite 16 Mittwoch, 20. Juni 2007 7:58 07