Edimax Technology AR-7265WnB User Manual

Page 24

8. Reboot the PC. Your PC will now obtain an IP address automatically from

your router’s DHCP server.

Note: Please make sure that the router’s DHCP server is the only DHCP

server available on your LAN.

Windows NT

1. Click

the

Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

2. Double-click

Network icon. The Network window will appear. Select the

Protocol tab from the Network window.

3. Check

the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is

not installed, click the Add button to install it now. If TCP/IP is installed, go to

step 5.

4. In

the

Select Network Protocol window, select the TCP/IP Protocol and click

the Ok button to start installing the TCP/IP protocol. You may need your

Windows CD to complete the installation.