Edimax Technology EW-7722UTn User Manual

Page 47

2-7-1 WPS Button (Push-Button)

With WPS button, it is easy to connect with a secure wireless network. If the wireless

AP/Router supports WPS feature, just press the WPS button of the wireless AP/Router

first. After press the WPS button on the wireless adaptor. The wireless adaptor will scan

and connect with the AP/Router automatically, no need any further setup process and

security setting ...etc. in the adaptor utility.

2-7-2 WPS Setup - PBC (Push-Button Configuration)

1. Right-click the Edimax configuration utility icon located at lower-right corner of computer

desktop and then click ‘Launch Config Utility’.

2. Click ‘WPS’ menu, and the following settings will appear.

3. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on your wireless access

point (the button used to activate WPS standby mode may have another name), or use

other way to start WPS PBC standby mode as the instruction given by your wireless

access point’s user manual.