Status – Edimax Technology IC-1510Wg User Manual

Page 66

Upgrade Firmware

You can upgrade camera’s firmware via this function. Press the

browse button, find the correct firmware and press upgrade.

Reset to Factory Defaults If you want to reset all the camera settings to default, click this

button.

Reboot Device

To reboot the Internet Camera, click “Reboot”.

LED Setting

There are four LEDs to indicate the status of Internet Camera. If

you wan to secure the camera from noticing, you can turn off the

LED light by clicking “LED Light OFF”. To turn on the LED light,

click “LED Light ON”.

8.7.

Status

The “Status” shows the current firmware version, uptime, system time and IP information of

this camera.