Edimax Technology 3G-6408n - Manual (Page 45)

44
3-1-3 Remote Management
Setting up the “Remote Management” function allows you to manage this broadband
router from outside your local area network (from the Internet).
Item Name Description
Host Address Assign an IP address with which to access this router
remotely.
Port Assign a port number with which to access this router
remotely. The default value is “8080”. You can use
any integer between 1 and 65534.
Enabled Check this box to enable the “Remote Management”
function.
Click “Apply” to save the changes. After you have clicked “Apply”, you will see the
following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.