Rarp – Edimax Technology PS-3103P User Manual

Page 74

correspond to the IP address you want to assign to the

PrintSir.

For example, a PrintSir with the following

configuration:

Node ID: 0000B4010101 (this implies Ethernet

address is 0000B4010101),

IP address: 203.66.191.12

The entry for this PrintSir in the /etc/bootptab file

should be:

PS010101:\

:ht=1:\

:ha=0000B4010101:\

:ip=203.66.191.12:

6.3.4 RARP

The procedure below enables the RARP daemon

running on your system to respond to a RARP request

from the PrintSir and to assign the IP address to the

PrintSir.

1. Log in the host of RARP server as the superuser

(root).

2. Assign a name corresponding to the PrintSir’s IP

address. You can add this address to the

/etc/hosts file, by adding a line such as:

203.66.191.12 pserver