Edimax Technology PS-3103P User Manual

Page 25

After the installation, you have completed the

following tasks,

z Install all utilities and drivers to the

administrator’s PC.

z Configure the print server (including the print

server name and network protocol)

z Add the network port of the print server to the

administrator’s PC.

Now, you have completed the administrator’s

setup for most of the network environment. You can

then perform the “Client Installation” procedure

(Section 3.4) on all clients’ sides of the network.

If you want to print from this administrator’s PC

to the print server, all you need to do is to perform

Windows’ standard “Add Printer” procedure as

described below.

Step1. Click “Start” button, choose Setting => Printers

Step2. Double click “Add New Printer”