DAEWOO ELECTRONICS RCU-3000 - Manual (Page 8)

Turn OFF the cleaner.
Remove the BOTTOM PLAE of NOZZLE. ( unscrewing 5 screws with "+" shape screw driver. )
Set the new BELT over Motor Pully.
Hang the AGITATOR BRUSH into the BELT and assemble the AGITATOR BRUSH.
Cover the BOTTOM PLATE and secure the 5 srcews
- Warnig : Before replacing the BELT. Check the disconnecting the cleaner from the electrical outlet.
BELT TYPE No. : XXXXXX ( Grand River, USA )
Turn OFF the cleaner.
Press the RELEASE PEDLA and place the HANDLE in the low position.
Remove the LENZ ( unscrewing a screws with "+" shape screw driver. )
Pull the BULB straight out of the SOCKET
Install the new BULB
Cover the LENZ and secure a screw.
BULB TYPE No. : XXXXXX ( GE type No. GE906, 12 Volt )
REPLACING HEAD LIGHT ( only for RCU-3008F )
REPLACING BELT OF AGITATOR BRUSH