DAEWOO ELECTRONICS RCU-3000 - Manual (Page 3)

HOSE GUIDE assembling
- Set HOSE GUIDE on the top of the cleaner
- Screwing a screw with the "+" shape screw driver
HOSE AS assembling
- Insert the body side of HOSE AS
in the hose hole of the cleaner.
- Caution : Insert the protrusion of HOSE end
through " " mark in side of the hose hole
If connected the HOSE and the BODY,
The HOSE can not be removed from the BODY.
If need the disassembling it, call the A/S center.
HOSE GUIDE & HOSE ASSEMBLING
HANDLE ASSEMBLING NOZZLE ASSEMBLING
HOSE
HANDLE
NOZZLE
BODY
Handle
Removal
Button
Protrusion
to lock
HANDLE assembling
- Insert HANDLE
in the handle hole
on the top of the Body
as below the picture.
HANDLE disassembling
- Push the Handle
Removal Button
- Pull HANDLE upward
Remove
Button for
Nozzle
NOZZLE assembling
- Set the main BODY
on the top of the Body
as below the picture.
- Use the both side of
the guide feature
on the NOZZLE.
NOZZLE disassembling
- Push the Nozzle
Removal Button
- Lift up the BODY