Festool PSBC 420 EB User Manual
Page 14

14
C A R V E X
GB
Original operating manual
1
Symbols
2
Machine features
The illustrations specified are located at the begin-
ning and end of the operating manual.
3
Intended use
Jigsaws are designed for sawing wood and similar
materials similar to wood. With the special saw
blades offered by Festool, these machines can also
be used for sawing plastic, steel, aluminium, non-
ferrous metal and ceramic plates.
The charger TRC 3 is designed for charging the bat-
tery packs listed.
The user is liable for improper or non-in-
tended use.
4
Technical data
Symbols ................................................
Machine features ..................................
Intended use .........................................
Technical data.......................................
Safety instructions................................
Operation ..............................................
Settings.................................................
Working with the machine....................
Service and maintenance .....................
10 Accessories...........................................
11 Transport ..............................................
12 Environment .........................................
13 EU Declaration of Conformity ..............
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Do not throw in the household waste.
[1-1]
Chip guard
[1-2]
On/Off switch
[1-3]
Variable speed trigger (only PSBC 420 EB)
[1-4]
Switch lock (only PSBC 420 EB)
[1-5]
Adjusting wheel for stroke speed control
[1-6]
Buttons for releasing the battery pack
[1-7]
Extractor connector
[1-8]
Saw table change lever
[1-9]
Saw blade ejection
[1-10] Replaceable saw table
[1-11] Pendulum stroke switch
[1-12] Base runner
Cordless jigsaws
PSC 420 EB
PSBC 420 EB
Motor voltage
10,8 - 18 V
Stroke speed
1500 - 3800 rpm
1000 - 3800 rpm
Stroke length
26 mm
Pendulum stroke
4 steps
max. inclination (only with accessory angle
table WT-PS 400)
45° to both sides
max. cutting depth (depending on saw blade)
Wood
120 mm
Aluminium
20 mm
Steel
10 mm
Weight without battery pack
1,8 kg
Safety class
/II