Festool DR 20 - Manual (Page 12)

12
DR 20 E GB
Original operating manual
1 Symbols
2 Machine features
The specified illustrations appear at the beginning
of the Operating Instructions.
3 Intended use
Drill suitable
– for drilling in metal, wood, plastics and similar
materials,
– for screwing in and tightening screws.
The user is liable for improper or non-in-
tended use.
4 Technical data
* Static torque electronically limited
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
– Hold power tool by insulated gripping surfaces,
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring or its own cord. Cutting accessory or fas-
teners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
– Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
– Avoid unintentional activation.Carrying the
electric power tool with your fingers on the on/off
switch can lead to accidents.
– Wait until the power tool stops completely until
placing it down. The tool can become entangled
and lead to a loss of control of the power tool.
– The machine must never be operated when wet
or located in a damp environment. Connect de-
vices that you intend to use outdoors via an earth
leakage circuit breaker (FI) with a maximum re-
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
[1-1] Chuck
[1-2] Release ring
[1-3] Right/left switch
[1-4] On/Off switch
[1-5] Mains power cable
[1-6] Additional handle
[1-7] Depth stop
Drill DR 20 E
Power 1100 W
Idling speed 0 - 650 rpm
Max. torque 98 Nm *
Chuck clamping range 3 - 16 mm
Tool holder in drill spindle 1/4 ’’
Drill diameter max.
Steel 20 mm
Aluminium 28 mm
Wood 65 mm
Flange 57 mm
Weight 3,2 kg
Safety class /II