Festool KAL - Manual (Page 13)

13
KAL GB
L
If you decide to operate the
light with an external Festool
battery pack, the attachment
handle must be detached be-
forehand [2A].
Setup angle
The working light can be positioned
at three different angles [3].
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached
to the threaded tripod socket [2-1].
6.4 Temperature monitoring
If the temperature of the light ex-
ceeds the maximum or minimum
permitted operating temperature,
the working light switches to emer-
gency power mode with reduced lu-
minosity and then switches off after
30 seconds.
6.5 Operating with external
Festool battery pack [2A]
+ [2B]
The working light can operate with
any Festool battery pack from the
BPC or BPS series. When connected
to the external Festool battery pack,
the working light only consumes
power from this battery pack.
L
Only compatible Festool charg-
ers can charge the Festool bat-
tery pack.
7 Service and maintenance
Customer service and re-
pair only through manufac-
turer or service workshops:
Please find the nearest address at:
www.festool.com/Service
Use only original Festool
spare parts! Order No. at:
www.festool.com/Service
– Always clean the plastic cover on
the working light using a soft,
dry cloth to prevent any dam-
age. Do not use solvents.
– Keep the contacts on the work-
ing light and battery pack clean.
– Always appoint an authorised
service workshop to replace
damaged integral batteries.
8 Accessories
The order numbers of the accesso-
ries and tools can be found in the
Festool catalogue or on the Internet
under "www.festool.com".
9 Environment
Prior to disposal
Remove the integral
battery from the de-
vice! Dismantle the
housing components and
remove the battery. Dis-
pose of the battery using
our return service.
EKAT
1
2 3 5
4