2Wire Gateway None - Manual (Page 53)

Firewall Tab
48
3. Click DONE .
4. Access the computer that you selected in step 1.
5. Confirm that the computer is configured for DHCP. If it is not, configure it for DHCP.
6. Restart the computer. When the computer restarts, it receives a special IP address from the system
and all unassigned TCP and UDP ports are forwarded to it.
To stop DMZplus:
1. From the Select a computer pull-down menu, select the computer for which you would like to disable
DMZplus.
2. In the Edit firewall settings for this computer pane, click Maximum protection .
3. Click DONE .
4. Access the computer that you selected in step 1. If the computer will continue to automatically obtain
an IP address, proceed to step 5. If the computer will have a static IP address, configure it with a valid
static IP address.
5. Restart the computer.
Viewing the Firewall Log
The 2Wire gateway keeps a log of all firewall-related events that occur. Each log entry contains the date and
time the event occurred, the severity level of the event, and details about the event.
To view the log:
• Open a Web browser and access the 2Wire gateway user interface by entering
http://gateway.2wire.net.
• Click the Firewall tab.