beautypg.com

Dukane Projector 8912H User Manual

Page 39

background image

39

SCREEN menu

SCREEN menu (continued)

Item

Description

SOURCE NAME

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ buttons on the SCREEN menu to

select SOURCE NAME and press the ► button.

The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SOURCE

NAME menu to select the port to be named

and press the ► button. Right side of the

menu is blank until a name is specified.

The SOURCE NAME dialog will be displayed.

(3) The current name will be displayed on the

first line. Use the ▲/▼/◄/► buttons and the

ENTER or INPUT button to select and enter

characters. The RESET button can be used

to erase 1 character at a time. Also if you

move the cursor to DELETE or ALL CLEAR on

screen and push the ENTER or INPUT button,

1 character or all characters will be erased. The

name can be a maximum of 16 characters.

(4) To change an already inserted character,

press the ▲ button to move the cursor to the

first line, and use the ◄/► buttons to move

the cursor on the character to be changed.

After pressing the ENTER or INPUT button, the character is selected.

Then, follow the same procedure as described at the item (3) above.

(5) To finish entering text, move the cursor to the SAVE on screen

and press the ENTER or INPUT button. To revert to the previous

name without saving changes, move the cursor to the CANCEL on

screen and press the ENTER or INPUT button.

TEMPLATE

Using ▲/▼ buttons switches the mode for the template screen. The

selected template pattern can be displayed when the MY BUTTON

allocated to the TEMPLATE function is pressed (42).

DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2

 

TEST PATTERN ó DOT-LINE1