beautypg.com

Turning on the power, Turning off the power, Use the shutdown switch – Dukane Projector 8912H User Manual

Page 14: Standby/on button power indicator power switch, Power switch, Power on/off

background image

4

Power on/off

1.

Make sure that the power cord is firmly and correctly

connected to the projector and the outlet.

Turning on the power

2.

Remove the lens cover, and set the power switch to

ON position (marked “ I ”).

The POWER indicator will light up in steady orange

(60). Then wait several seconds because the

buttons may not function for these several seconds.

3.

Press STANDBY/ON button on the projector or the

remote control.

The projection lamp will light up and POWER indicator

will begin blinking in green. When the power is

completely on, the indicator will stop blinking and light

in steady green (60).

Power on/off

To display the picture, select an input signal according to the

section “Selecting an input signal”(15).

►A strong light is emitted when the projector’s power is on. Do

not look into the lens of the projector or look inside of the projector through any

of the projector’s openings.

►Do not touch around the lamp cover and the exhaust vents during use or just

after use, since it is too hot.

WARNING

1.

Press the STANDBY/ON button on the projector or the remote control. The message

“Power off?” will appear on the screen for about 5 seconds.

Turning off the power

2.

Press the STANDBY/ON button again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange.

Then POWER indicator will stop blinking and light in steady orange when the lamp

cooling is complete (60).

3.

Make sure that POWER indicator lights in steady orange, and set the

power switch to OFF position (marked “O“).

POWER indicator will go off. Attach the lens cover.

Do not turn the projector on for about 10 minutes or more after turning it off.

Turning the projector on again too soon could shorten the lifetime of some

consumable parts of the projector.

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH BLANK

MUTE

MY BUTTON

POSITION

1

2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

UP

VOLUME

DOWN

ON

OFF

FREEZE

STANDBY/ON button

POWER indicator

Power switch

HOME

PAGE UP

PAGE DOWN

END

VIDEO

SEARCH

FREEZE

OFF

ON

MAGNIFY

ASPECT

AUTO

BLANK

MUTE

VOLUME

KEYSTONE

MY BUTTON

POSITION

1

2

ESC

ENTER

MENU

RESET

COMPUTER

Power switch

• Turn the power on/off in right order. Please power on the projector

prior to the connected devices.

• When the AUTO ON of the OPTION menu is set to the TURN ON, and the power

was turned off by the power switch last time, turning the power switch on makes

the projection lamp light on without pushing the STANDBY/ON button

(40)

.

• Use the shutdown switch

(61)

only when the projector is not turned off by

normal procedure.

NOTE