3M MP8030 User Manual
Page 26
23
3M 1996
3M
Multimedia Projector MP8030
Insert the air cleaner in the door (Figure 7-5),
position the retaining frame over the air cleaner and
push the tabs down into the tab slots to hold the air
cleaner and frame to the door.
Tab Slot
Figure 7-5. Insert Frame and Air Cleaner
Insert the hinge tabs on the door into the slots in the
projector body and swing the door down. Push on
the handle to fully engage the door latch and then
tighten the retaining screws to secure the door.
(Figure 7-6).
Note
The air cleaner door must be closed and
latched or power to the lamp will be shut off
and the LAMP indicator will come on.
Hinge Tab
Slot
Figure 7-6. Insert Door and Close Tightly