3Com iCV-01a - Manual (Page 12)

Chapter 3: Web Interface
To change Video Codec, click Click Save to confirm changes.
Digital Zoom In, Digital Zoom Out
Rotate Left, Rotate Right
Flip the image vertically.
HotSpot icon. Each item corresponds to HotSpot location set in Basic
Setting
Patrol Settings Hotspot Setting. Click to jump to the
pre-set location.
Click S to recalibrate and center the camera.
Directional Tool. Click to move the camera 1 degree in the direction
of the arrow.
Directional Tool. Click to move the camera 5 degrees in the direction
of the arrow.
Auto Patrol icon. Click to enable auto patrolling.
Note: The availability of Codec depends on weather the individual user
has it installed on the PC or not. Download and install Windows Media
Player 10 to enable MPEG4 codec.
Note:
These icons will not show if you do not have either, (1) a CM03a Pan Tilt
camera, (2) administrator permission or (3) operator permission.
Note:
If the account permission is Viewer, then the HotSpot icon, Directional
Tool and Auto Patrol icon will not be available.
WebCAM - user manual -9-