888 Digital ASDA-A2 - Manual (Page 4)

English-3
Main Circuit Terminal Wiring
¾ Please perform the wiring after the terminal blocks are all removed from the drive.
¾ Insert only one wire into one terminal on the terminal block.
¾ When inserting wires, please ensure that the conductors are not shorted to adjacent terminals or wires.
¾ Ensure to double check the wiring before applying power to the drive.
Servo Drive and Servo Motor Combinations
Power Servo Drive Servo Motor
200W ASD-A2-0221- ECMA-C10602 SΰS=14mmα
400W ASD-A2-0421-
ECMA-C10604 SΰS=14mmα
ECMA-C10804 7ΰ7=14mmα
ECMA-E11305 SΰS=22mmα
ECMA-G11303 SΰS=22mmα
750W ASD-A2-0721-
ECMA-C10807 SΰS=19mmα
ECMA-G11306 SΰS=22mmα
1000W ASD-A2-1021-
ECMA-C11010 SΰS=22mmα
ECMA-E11310 SΰS=22mmα
ECMA-G11309 SΰS=22mmα
1500W ASD-A2-1521- ECMA-E11315 SΰS=22mmα
2000W ASD-A2-2023-
ECMA-C11020 SΰS=22mmα
ECMA-E11320 SΰS=22mmα
ECMA-E11820 SΰS=35mmα
3000W ASD-A2-3023-
ECMA-E11830 SΰS=35mmα
ECMA-F11830 SΰS=35mmα
Cable Specifications for Servo Drive
Power Cable - Wire Gauge mm
2
(AWG)
Servo Drive and Servo Motor
L
1C
, L
2C
R, S, T U, V, W P , C
ASD-A2-0221- ECMA-C10602 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ECMA-C10604 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ECMA-C10804 7 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ECMA-E11305 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ASD-A2-0421-
ECMA-G11303 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ECMA-C10807 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ASD-A2-0721-
ECMA-G11306 S 1.3 (AWG16) 2.1 (AWG14) 0.82 (AWG18) 2.1 (AWG14)
ECMA-C11010 S 1.3 (AWG16) 2.1 (AWG14) 1.3 (AWG16) 2.1 (AWG14)
ECMA-E11310 S 1.3 (AWG16) 2.1 (AWG14) 1.3 (AWG16) 2.1 (AWG14) ASD-A2-1021-
ECMA-G11309 S 1.3 (AWG16) 2.1 (AWG14) 1.3 (AWG16) 2.1 (AWG14)
ASD-A2-1521- ECMA-E11315 S 1.3 (AWG16) 2.1 (AWG14) 1.3 (AWG16) 2.1 (AWG14)
ECMA-C11020 S 1.3 (AWG16) 2.1 (AWG14) 2.1 (AWG14) 2.1 (AWG14)
ECMA-E11320 S 1.3 (AWG16) 2.1 (AWG14) 2.1 (AWG14) 2.1 (AWG14) ASD-A2-2023-
ECMA-E11820 S 1.3 (AWG16) 2.1 (AWG14) 3.3 (AWG12) 2.1 (AWG14)
ECMA-E11830 S 1.3 (AWG16) 2.1 (AWG14) 3.3 (AWG12) 2.1 (AWG14)
ASD-A2-3023-
ECMA-F11830 S 1.3 (AWG16) 2.1 (AWG14) 3.3 (AWG12) 2.1 (AWG14)
NOTE 1) The boxes ( ) at the ends of the servo drive model names are for optional configurations
(Full-closed loop, CANopen and extension DI port). For the actual model name, please refer
to the ordering information of the actual purchased product.
2) The boxes ( ) in the servo motor model names are for optional configurations (keyway,
brake and oil seal).