Setting up (continued), Connecting the power supply, Connecting to a monitor – 3M X70 User Manual
Page 11: Connecting to a speaker (with amplifier), Monitor projector, Speaker projector, Firmly plug the power cord’s plug into the outlet, Rgb in rgb cable rgb out, Audio in stereo mini cable audio out, Ac inlet connector plug outlet
11
Setting Up (continued)
Setting Up (continued)
remote control
video in
R-audio in-L
S-video in
BNC
rgb
audio in1
audio in2
rgb out
audio out
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
control
network
CR/PR Ca/Pa
L
remote control
video in
R-audio in-L
S-video in
BNC
rgb
audio in1
audio in2
rgb out
audio out
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
control
network
CR/PR Ca/Pa
M
Monitor
Projector
RGB in
RGB cable
rgb out
Connecting to a monitor
Speaker
Projector
Connecting to a speaker (with amplifier)
Audio in
Stereo Mini cable
audio out
M
L
WARNING • Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “Product Safety
Guide” and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect the connector of the power cord to
the AC inlet of the projector.
2
Firmly plug the power cord’s plug into the
outlet.
AC Inlet
Connector
Plug
Outlet
Connecting The Power Supply