8e6 Technologies ProxyBlocker User Manual

Page 43

6 P

roxy

locker

uick

tart

uide

Network: LAN Settings

From the navigation panel, click Network and choose LAN Settings from the pop-up

menu:

Make the following entries for the ProxyBlocker in the LAN Settings window:

A. Enter the

Host Name that includes your domain name, for example PBASERVER.

myserver.com (the NetBIOS name must be capitalized). It is important to enter

something identifiable, because once the product is registered, this host name is

used by 8e6 Technologies to recognize your account for library updates. This name

needs to be a valid DNS entry.

B. Enter the

LAN1 IP address and specify the subnet for LAN 1, the ProxyBlocker’s first

Ethernet Network Interface Card (NIC).

You may use a non-routeable IP address for the listening interface and a subnet

mask of 255.255.255.255 (32 bites).

C. Enter the

LAN2 IP address and subnet for LAN 2, the ProxyBlocker’s second Ether-

net NIC. The subnet selection is usually 255.255.0.0 (16 bites) or 255.255.255.0 (24

bites), but cannot be 255.255.255.255 (32 bites).

D. Enter the

Primary IP address of the first DNS name server. The ProxyBlocker uses

this name server to resolve the domain name requested by users from the LAN.