Covad 6812D-MGCP - Manual (Page 16)

16 Covad Confidential
9. Configure the Default Gateway address for the phone by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (1) button, or move cursor to “1. Network Configuration” using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
ƒ Press the (4) button, or move cursor to “4. Default Gateway”” using [Next]/[Prev] soft keys, and press the
[OK ] soft key.
ƒ Input the Default Gateway address using the keypad
ƒ - Press the asterisk (‘*’) button to input dot (‘.’).
ƒ - Press [Clr ] soft key to delete all characters.
ƒ - Press [ß] soft key to delete the character in front of cursor.
ƒ - The Default Gateway can be changed only under the ‘Static’ mode, and not in the ‘DHCP’ mode.
ƒ Press the [OK] softkey
10. Configure the Call Server Address for the phone by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (2) button, or move cursor to “2. VoIP Configuration” using [Next]/[Prev] soft keys, and press the
[OK ] soft key.
ƒ Press the (1) button, or move cursor to “1. Call Server Address” using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
ƒ Input the Call Server address using the keypad
ƒ - 68.165.105.130 (SNVL), 64.2.21.61 (SNJS) or 68.165.105.160 (SNVL2)
ƒ - Press the asterisk (‘*’) button to input dot (‘.’).
ƒ - Press [Clr ] soft key to delete all characters.
ƒ - Press [ß] soft key to delete the character in front of cursor.
ƒ Press the [OK] softkey
LG IP Phone Configuration – Manual Method