Covad 6812D-MGCP - Manual (Page 14)

14 Covad Confidential
4. To configure the phone manually, the following information will be needed
ƒ IP address for the LG phone
ƒ Subnet Mask
ƒ Default Gateway Address
ƒ TFTP server IP address (64.2.21.251 SNVL, 64.2.21.45 SNJS, 68.165.105.181 SNVL2 or 72.245.184.75
DC)
ƒ Call Server IP address (68.165.105.130 SNVL, 64.2.21.61 SNJS, 68.165.105.160 SNVL2 or
72.245.184.130 DC)
ƒ NTP server IP address (64.2.21.49)
ƒ If you don’t know your TFTP or Call Server IP address, please contact VoIP Support or Provisioning
5. Prepare to configure the phone by following these steps.
Connect the phone to the local network by plugging the Ethernet cable into the port labeled LAN on the
underside of the phone.
ƒ Connect the power cord to the phone
6. Configure the Network Mode to Static IP address by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (1) button, or move cursor to “1. Network Configuration” using [Next]/[Prev] soft keys, and
press the [OK ] soft key.
ƒ Press the (1) button, or move cursor to “1. Network Mode” using [Next]/[Prev] soft keys, and press the
[OK ] soft key.
ƒ Choose the Network Mode using [Next]/[Prev] soft keys, and press [OK ] soft key to save your selection.
LG IP Phone Configuration – Manual Method