3M MP8745 - Manual (Page 32)

3M ™ Multimedia Projector MP8745 © 3M 1999
TECHNICAL
A-6
A.6 Indicator Status
The POWER, LAMP and TEMP indicators will light or blink in the following cases:
*When the LAMP indicator lights or blinks, turn the power off. If the problem persists, contact your dealer.
POWER LAMP TEMP MEANING REMEDY
INDICATOR INDICATOR INDICATOR
Lights orange Turns off Turns off Standby mode Normal
Flashes green Turns off Turns off During warm up Normal
Lights green Turns off Turns off During operation Normal
Flashes orange Turns off Turns off During cooling down Normal
Lights red Lights red Turns off Lamp does not light Turn off power and let
projector cool for 45 minutes.
Lights red Flashes red Turns off Lamp or lamp cover Fully insert lamp module or
loose or missing. lamp cover and secure with
retaining screws.
Lights red Turns off Flashes red Cooling fan not Contact your dealer.
operating.
Flashes red Flashes red Turns off The lamp operating Replace the lamp.
hours have reached
maximum operating
hours.