Turning on the power – 3M MP8790 User Manual

Page 16

Make sure that the power cord is firmly and
correctly connected to the projector and outlet

Turn on the projector's power

Set the power switch to [ | ] (ON). The STANDBY/ON
indicator will light to solid orange.

Press the STANDBY/ON button (control
panel or remote control)

• The projector begins warming up and the

STANDBY/ON indicator blinks green.

• The STANDBY/ON indicator stops blinking

and lights to solid green once the
projector's power is completely on.

Remove the lens cap

The picture is projected.

STANDBY/ON

VIDEO

DOWN

BLANK

LASER
INDICATOR

LASER

RGB

FOCUS

ZOOM

PAGE

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power.

WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.

Turn the

power on/off in
right order.

• Power on the

projector before the
computer or video
tape recorder.

• Power off the

projector after the
computer or video
tape recorder.

NOTE

Control panel

STANDBY/ON

power switch

STANDBY/ON indicator