Tektronix Kit Z340PL - Manual (Page 2)

2
PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL
Important! About the printer’s IP address
Upgrading the printer will erase the printer’s IP address from the printer’s
non-volatile memory. Therefore you should print the printer’s configuration
page, which lists the printer’s IP address, before upgrading the printer.
1. While the printer is idle, press the Menu button to scroll to the Help
pages menu item.
2. Press the arrow button to scroll to the item Configuration pag e. Press
the Print button to print the Configuration page.
3. Note the printer’s IP address printed on the print and save the print
for later reference.
Static electricity precautions
■ Wear the wriststrap and connect it to the metal frame of the printer.
■ Leave the printer plugged into its power outlet. This preserves a
ground path for static discharges.
■ Handle the circuit board(s) by their edges only. Do not lay the
board(s) on a metal surface.
■ Avoid wearing nylon or polyester clothing; they generate static
electricity.