Operation – Zenoah G3100T User Manual

Page 13

7. Operation

• When the brake worked, immediately release

the throttle lever and slow down the engine
speed. Running the engine at high speed while
braking the saw chain can cause clutch failures.

• Before starting the day's job, check the condition

of the brake system as follows:

1) Start the engine and grasp the handles

securely with both hands.

2) While pulling the throttle lever, slowly push

the brake lever (front hand guard) forward
with the back of your left hand.

3) Check that the brake works normally, then

release the throttle lever.

4) Pull the brake lever back to the OFF position.

NOTE

13 