Yamaha RX-V795 - Manual (Page 47)

When the selector dial is set at a position other
than DSP:
* Do the next operation while the indicator is
illuminated. If the indicator goes off before you
do the next operation, press the DSP key
again.
43
English
Using digital sound field processor (DSP)
Playing a source with an effect of the digital sound field processor (DSP)
A/B/C/D/E
+ 100
+ 10
POWER
TV
1 3
CD
TUNER
TAPE/MD
DVD/LD
TV/DBS
VCR
PHONO
V-AUX
EXT. DEC.
CH CH
VOLUME
MUTE
MOVIE
THEATER 1
MONO MOVIE DISCO
TV SPORTS
ROCK CHURCH
JAZZ CLUB
CLEAR
SLEEP
ENTER
HALL TEST
EFCT
DISP
DSP
TV
DISC SKIP
PRESET ON/OFF
CODE SET
INDEX
ON SCREEN
2
5
8
4
7
0
9
6
This unit incorporates a sophisticated, multi-program digital sound field processor. The processor allows you to electronically expand
and change the shape of the audio sound field from both audio and video sources, creating a theater-like experience in your
listening room. You can create an excellent audio sound field by selecting a suitable sound field program (this will, of course, depend
on what you will be listening to), and adding desired adjustments.
In addition, this unit incorporates a Dolby Digital decoder and a Dolby Pro Logic Surround decoder for multi-channel sound
reproduction of sources encoded with Dolby Surround, and a DTS decoder for multi-channel sound reproduction of sources encoded
with DTS. The operation of these decoders can be controlled by selecting a corresponding DSP program including a combined
operation of YAMAHA DSP and Dolby Digital, Dolby Pro Logic Surround or DTS.
This unit has 10 programs for digital sound field processing; 5 programs for Audio sources and 5 programs for Audio/Video sources.
In addition, some programs have two subprograms. All programs contain parameters that can be adjusted to the listener’s taste.
For details about digital sound field programs, refer to pages 48 to 50.
2
When operating on the front panel:
If no program name is illuminated on
the display panel, press the EFFECT
button to turn on the digital sound field
processor so that a name of a DSP
program appears on the display panel
and the monitor screen.
NATURAL SOUND AV RECEIVER
SPEAKERS PHONES A
ON OFF ON OFF
B
BASS TREBLE BALANCE VIDEO AUX
S VIDEO VIDEO L AUDIO R
VOLUME INPUT SELECTOR
5 5 4
3
2 l 0 l 2
3
4 5 5 4
3
2 l 0 l 2
3
4 L R
l6 20
28
40
60
l2
8
4
2
0 –dB
BASS EXTENSION TONE BYPASS
5 5 4
3
2 l 0 l 2
3
4
LEVEL EFFECT SET MENU
PROGRAM
A/B/C/D/E 1 2 3 4 5 6 7 8 MEMORY EDIT FM/AM DOWN TUNING UP INPUT MODE TUNING MODE
MAN’L/AUTO FM AUTO/MAN’L MONO
CINEMA DSP
TAPE/MD MON /EXT. DECODER
STANDBY/ON
2
2
DVD/LD
TV/DBS
V-AUX
VCR
CONTINUED
EFFECT
BASIC OPERATION
POWER STANDBY
CD TAPE/MD MOVIE THEATER 1
MOVIE THEATER 2 /DTS SURROUND
AMP/TUN
DSP
The indicator lights up for
about 3 seconds.
When the selector dial is set
at DSP:
Go on to the next step.
When operating on the remote controller:
1
Follow steps 1 to 7 shown in “Playing a source” on pages 33 to 34.
POWER STANDBY
CD TAPE/MD MOVIE THEATER 1
MOVIE
THEATER 2
/DTS
SURROUND
DSP
DSP